How to connect the graphics card to power supply

How to connect the graphics card to power supply

Upgrading your graphics card, like it or not, is one of the most straightforward tasks you can perform on your computer. This procedure is identical to that used to replace RAM: all you have to do is take the old GPU and replace it with a new one. If this is the first occasion installing a graphics card, we’ll teach you how to do it properly.

You first must remove the controls before installing a new graphics card. If you’re using Windows 10, use Press Windows + I to open the Settings menu and then choose Apps. To discover AMD or Nvidia display controls, use the search option. Choose these, then select Download and allow for the installation to finish before turning off your computer.

We recommend that you take certain measures when uninstalling or reinstalling any parts before going with this instruction on installing graphics cards. This includes not only removing the cord, but also placing a pro hand strap just on rubber cloth and periodically feeling the computer’s metal frame to ensure that nothing is on it. There is no static charge on it.

Uninstall the old video card first.

You should remove your old graphics card prior to installing a new one if your laptop has one. If you’re just getting started, skip to the next section of our graphics card installation instructions.

You must first disconnect the power wires if you have one. They’re normally close to the end of the cards and also have a pushing pin that needs to be squeezed to release.

After that, you’ll have to delete the patches that keep it in the PCI Express backplane. Remove them with your fingers (if they’re patches) or a screwdriver, and keep them because we’ll want them to set up the new GPU.

The next step is to undo the clip device that holds the card in place on most motherboards. It was at the bottom of a Pcie slot on the card. Some buttons need to be pressed, while others have to be pushed to the side. If the card is in the way and you can’t see it clearly, see if you can loosen it by stroking it. You may still seek up the specifications of your motherboard on the internet.

Carefully remove the cards out of the PCIe slot after the clasp is unfastened. Because a card can get caught in the rear of a PCI Express due to the way it’s built, tugging on something a little to remove it isn’t a bad idea.

Uninstall the Pcie board in the second step.

A better graphics card cannot be installed without leaving room on the Pcie backplane. There may be enough space if you’ve uninstalled your old video card, but if you have not yet, or if your new GPU is larger than the previous one, you may have to replace one or more backplates. ۔

Examine your better graphics card and make sure it’s in the Pcie slot where you want it to go. This is normally the board’s most ‘top’ location (if you’re not sure, consult your board’s handbook or do some research online). Determine how many Pcie slots you’ll need and remove the required amount of rubber grommets with your fingertips or a screwdriver.

Store them in a secure location since you never know when you might need them again.

Step 3: Replace the old card with a new one.

It’s ready to implement your fresh graphics card now that you do have the necessary space. This procedure is straightforward, but depending on the size of your Pc and the obstacles to reaching its other components, it may be difficult. In any instance, your graphics card will be installed in the Pcie slot. Make sure that the I/O board just on the back of a card reader is properly seated in the PCI Express slot.

The most crucial thing to keep in mind is that you might not require much power to complete the installation. Maintain a powerful but gentle demeanor. Uninstall the card and examine and see if anything is obstructing with the PCI Express slot if you find it’s not been inserted correctly. When the motherboard is installed, you may hear a click, however it might not be the case with all motherboards.

When you’re happy with your installation, apply the patch to the back panel to keep it in place. You can adjust the card in its position to better match the patch if necessary.

Connect the power cords in step four.

Find the wires you require. Either one more 6-pin or 8-pin Pcie energy connectors can be used. Make sure you have the correct power cords, using the wrong one can cause harm to the components.

When you’re certain, place them in the appropriate slots at the back of your new Cpu. You ought to be able to listen to the voices, but giving them a gentle tug will verify that they will be fully engaged. They must not move if they are properly plugged in.

Step 5: Put it to the test.

The test of any PC hardware update is to see if it works. Before reconnecting the complete computer, double-check that you’ve accomplished everything correctly and that the power card, keyboard, and mouse, as well as the display, are all connected. Switch it on. Congratulations, you’ve fitted your new video card if you see an image!

If you’re not seeing an image, don’t fret; there could be a simple reason.

The first stage is to double-check that the power cords are properly connected. If the card is gaining power (computer fans are running, the flashing lights), continue the steps in our graphics card installation guide. ۔

To ensure that the card is properly linked, remove it and replace it in the slot. Also, make sure your monitor and graphics card are connected. Make sure the cable is plugged in properly on both ends.

If it doesn’t work, try resetting the computer’s CMOS or BIOS. It’s also a good idea to double-check that the Power Supply (PSU) can manage the new graphics card. RealHardTechX is an excellent resource for this knowledge.

Install new controls in step six.

After you’ve finished reading the instructions, it’s time to put some new controls in place. Remove it from your old graphics card if you haven’t already. To make the process even easier, we recommend utilizing a programme like Display Driver Uninstaller. The system should then be restarted.

Download the newest drivers either Nvidia or AMD, depending on the product of your video card, and run its installer. When you’ve finished all of the stages in the graphics card installation instructions, restart your computer and you’re ready to go.

Conclusion

Almost all graphics cards, but not all, require these additional power cables, as we discussed previously. Those that do not require it are usually low and/or low power models that do not exceed the board’s 75 watt limit. They don’t need anything extra to work if they already have enough.

In many situations, the performance of these types of graphics is so low that they are not even capable of being utilized in games, or at least not in games that are not light because they lack the necessary processing power. Graphics will be more advanced than they have ever been. There is a demand for more graphic resources.

Scroll to Top