How to install an Intel or AMD CPU in your computer

How to install an Intel or AMD CPU in your computer

Despite AMD’s differences from Intel, AMD processors are a popular alternative for users of all financial means. There are no sockets for the pins in the first place; they’re all on the chip itself. In addition, installing the cooler nearly often necessitates the use of a separate bracket. It’s possible to rapidly learn how to install an AMD processor even with all of the fine print.

Step 1: Prepare your pieces

Installing the software is time-consuming, and you don’t want to have to go back and get something you’ve misplaced in the middle of it. Besides the AMD processor, you’ll also need a motherboard and a cooling system. You don’t need anything additional if the cooler comes with pre-applied thermal paste, like AMD Ryzen. In this case, you’ll need to supply your own thermal paste.

As an additional precautionary measure, it’s always a good idea to have some pure isopropyl alcohol available, in case you get a little too enthusiastic with the paste. Using an antistatic bag is also a good idea, as is ensuring that you have adequate lighting to see what you’re doing when working with electronic devices.

In some cases, you may additionally require a screwdriver for the cooler you have. Check your cooler to see whether you have enough room for a long cross leg.

In addition, we recommend that you use an antistatic wrist strap to prevent the transfer of a static charge to your components. Ground yourself before contacting anything metal, such as the case of your PC or the chassis of your power supply, to ensure that your AMD processor is safe to use.

Step 2: Processors must be installed

In contrast to Intel processors, AMD chips feature pins. Be especially careful not to bend or break any of them, as doing so will prevent you from using your processor.

Find your motherboard’s processor socket and place the retaining arm vertically. Remove the socket’s protective cover if you’re working on a new motherboard. Removing the previous CPU and maybe the cooler is required if you’re upgrading your computer’s processor. To find out how to do that, check the owner’s manual for your cooler. If you intend to use the old CPU again, be careful when removing it.

Please remove the processor from the package if you haven’t already done so! Take a look at this section. There is a little golden triangle in one of the corners. Your motherboard’s CPU socket will have a triangle etched into it that will assist you to align the chip appropriately. Make certain that all of the pins are in the appropriate ports before inserting them into the socket. If it doesn’t fit well, pull it out and start over. You shouldn’t have to use force to get it to fit.

Once you’ve installed the CPU and verified that it’s installed correctly, reinstall the retention arm in the socket. A bit of force will be required, but it shouldn’t be excessive. In the event that you’re unsure about something, double-check that everything is in order.

Step 3: Install the air conditioner

Without a cooling, no AMD processor will last long. Air or liquid can be purchased separately or included in the same product. Regardless of the type of cooler, the installation process will be unique, so consult your handbook to learn more. You may need to get to the back of your motherboard, so you’ll need to remove the PC‘s rear panel.

You’ll need a way to effectively transmit heat from the processor to the cooler, regardless of which one you choose to use. Thermal paste or thermal pads are needed here. If your cooler comes with pre-applied paste, all you have to do is follow the instructions on the back of the cooler. You’ll have to apply the paste yourself if it doesn’t come that way.

Spreading it all over the surface or employing cross techniques are two methods of applying thermal paste, and each has its own merits. Using a pea-sized amount directly in the center of the chip is the quickest and most straightforward method. Using the lint-free cloth and rubbing alcohol, carefully wipe the chip if you overdo it. Then repeat the process.

Electrically conducting thermal pastes exist. A good rule of thumb is to avoid leaving any debris under the chip or in any of the socket ports. When putting it in place, be extremely cautious and accurate.

Placing an appropriate and snug-fitting thermal pad over the processor will suffice if you have one.

Step 4: Try it out.

Everything else is correct, so your processor should be in place. Check to verify if the system works properly after you’ve booted it up. Everything will be OK, if that’s the case. You should first use a temperature measurement app such as AMD’s Ryzen Master or HWInfo, to make sure your processor isn’t running much warmer. As it ought to be. So, if that’s the case, you may have a problem with your cooler’s installation or the screws.


Consult your Motherboard handbook if you’re having trouble booting your computer. Replace the processor and cooler if they need to be reinstalled.

Each screw will be lightly tightened with a star screwdriver, turning half a turn each time and following a cross pattern, with the end result being a cross pattern. That is, if we begin by tightening the screw in the upper right, the next step should be to tighten the screw in the lower left, and so on. In order to keep the heatsink attached to the AMD retention system, you must adhere to the blade design and tighten gradually. The IHS and the tens below it could be damaged if you try this.

James Hope
My name's James and throughout the long term. I have actually assembled numerous PCs for me as well as my companions. I love gaming, programming, illustrations planning and essentially whatever has to do with PCs and innovation.