How to overclock ryzen 1700x

How to overclock ryzen 1700x

Did you know that for many years, AMD was regarded as a second-rate alternative to Intel? For them, the introduction of the Ryzen series marked a sea change. It came pre-installed with multiple cores and excellent performance. In addition, it did not place a strain on the CPU’s processing power. In fact, it had the opposite effect, speeding up the CPU and making the previously unthinkable possible. While we’re on the subject, we should mention that many people are interested in learning how to overclock the Ryzen 7 1700X. All of this has been discussed in detail in this post; please try and read it.

Overclocking

With many CPUs in the system, we can’t help but overclock it a little bit. We’re keeping things as straightforward as possible. If we really want to overclock our computer, we must first complete a few steps. First and foremost, always invest in high-quality hardware (motherboard, power supply, memory, and cooling), as the lower-cost motherboards are frequently not well-suited for enthusiast overclocking. Also, make sure you have a reliable power supply and adequate processor cooling. In reality, overclocking any processor with eight or more cores (it doesn’t matter if it’s an Intel or AMD processor) is more challenging than you would expect. Both brands have an end result in the 4.2 to 4.3 range, which is similar to the performance of Intel processors.

So, what is the best way to overclock Ryzen 7 1700X?

As computers began to develop, there was a pressing need to make further advancements in their capabilities. Overclocking was required for a variety of reasons, including gaming, graphics development, and other applications. In layman’s terms, overclocking is the process that runs your processor at a faster velocity than the one specified by the manufacturer. Yes, customizing your computer will take a great deal of patience and effort on your part.

AMD’s Ryzen Master Utility is available for download from their official website. The fact that Windows allows for overclocking is quite advantageous. Despite this, we actually prefer to make changes to the firmware itself. In today’s world, overclocking is typically done through the BIOS screen on your motherboard.

The BIOS provides an excellent opportunity to dive into the settings and begin speeding up the computer’s operation. The clock frequency of a CPU determines how quickly it can complete tasks, but increasing it is not as simple as dialing a different phone number.

Overclocking Procedures: Steps to Follow

AMD processors have a more straightforward way of connecting to RAM than Intel processors. Yes, you seem to be free to experiment with different settings and achieve your desired speed levels. Overclocking has come a very long way, and all that is left is for it to do the following:

  • Two potentials, the multiplier (also known as the Core Ratio) and the base clock (BCLK), should be used in conjunction with one another to help determine the final clock speed.
  • To begin, you must understand that the base clock of a framework determines CPU speed just as it does the speeds of the various components on the motherboard, and if you are a beginner, we recommend that you leave this value at its default value.
  • Changes in the multiplier have an effect on the CPU speed, and it is at this point that speed increments occur, and the CPU clock speed matches the incentive with the base clock speed.
  • As a result, a base clock of 100 generates 4GHz, and a percentage increase of 40 should be sufficient.
  • Make sure to maintain stable operation of the cores, which means increasing their power to 1.35-1.37 volts; yes, you can go higher, up to 1.45 volts, but you’ll need cooling fins for that.
  • Now, perform a test method, and if there are no problems, increase the multiplicand by one and repeat the cycle until users start noticing variability.
  • Just keep an eye out for temperature fluctuations.

You should not be concerned about the time it will take for the overclocking process to complete. The troubleshooting process may take several iterations and you should expect to encounter OS corruption at one point or another. In order to get out of this mess, it is necessary to adhere to the manufacturer’s recommended speed limits. While tinkering, this will relieve some of the pressure.

Increasing the clock speed

Increasing the clock speed of the CPU can yield positive results when the CPU is the bottleneck. The Ryzen 7 1700X can be overclocked from its maximum speed of 3.8GHz all the way up to a maximum overclock of 4GHz when used with a motherboard that contains the X570 chipset. The system becomes unstable if the value is raised above this. With the R7 265 running at 1080p – ultra settings, the maximum performance gain was 2.5 percent and the minimum performance gain was 1.3 percent.

Electricity Consumption

Returning to the tweak, increasing the voltage applied to the CPU in order to achieve overclocking has a negative effect on the business energy consumption. When stressed and overclocked, we suddenly consume approximately 200 Watts when the processor is fully utilized. Power consumption for the entire PC, measured at the wall socket side, along with a GeForce GTX 1080 in low revs as well as the Predator 240 liquid cooling kit, is shown below (yes pumps and fans eat power as well). In terms of heat generation, power consumption, and clock frequency, all of the characteristics we observe, measure, and observe appear to be very similar to the 8-core 6900K.

Conclusion

Our research results are more widely applicable when liquid cooling is used properly. Overclocking to 4.1 GHz on all eight cores with voltage established to auto results in a steady and reasonable result. This is true for the ASUS HERO motherboard that we tested. That appears to be the sweet spot, and it is this number that I would like to suggest to you. Overclocking, on the other hand, is always dependent on the system, the PC, the ASIC quality, the cooling, and, of course, a little bit of luck.

Overclocking eight cores at a high clock rate is a difficult task, but it can be accomplished with relative ease through the BIOS. Of course, you can also make use of AMD’s software tool. AMD’s Ryzen 7 1800X processor operates at a base clock frequency of 3.6 GHz and an enhanced regularity of 4.0 GHz. Our measurements, which were done by trial and error, revealed that at 1.3751.425 Volts, you will achieve a clock speed of approximately 4.14.2 GHz (on all eight cores!). As well as yes, that is a small improvement over the fallback Turbo, but remember, this is an 8-core system!

Scroll to Top