There are a number of reasons why you might wish to get rid of the GPU in your current PC setup.
In some cases, you may wish to upgrade to a higher graphics card, or you might just want to replace your current graphics card.
Perhaps you’d like to clean the GPU because it’s been set for a long time, or perhaps you’d like to update as you don’t require all of the horsepower in your PC but still require it. You want to cut your expenses and earn some cash. Additional sales of the top GPU are available.
There are several causes for this.
In this post, we’ll show you how to remove your video card from the computer and make room for a new or alternative GPU, or if you just want to clean things up a little. Top
How to Uninstall a Graphics Card
1. Use Display Driver Uninstaller to remove any existing GPU drivers (DDU)
You can skip this step if you’re just cleaning your GPU or replacing it with a GPU that’s identical to your present GPU because it’ll utilize the very same driver as before. ۔
We’d like to prepare our PC (in terms of software) for a new GPU before we begin physicalizing something with our PC and removing the GPU. DDU (Display Driver Uninstaller) is an application that removes outdated GPU drivers from your computer.
This tool makes it simple to install a new GPU driver, as any leftovers from the previous GPU driver could create an issue when downloading drivers on your new GPU or new GPU. ۔ This is especially the case if you’re switching from one GPU manufacturer to another, or if you’re upgrading or replacing an existing GPU within a one- to two-year period.
To get DDU, go to Guru3D and look for the download. The site also provides instructions about how to use the application, and the programme itself has instructions if you forget them. Simply follow these directions, and you’ll have no trouble updating your drivers, and your machine will thank you.
2. Shut down your computer.
You may skip this step if your computer has already been turned off.
You now can officially follow this guide’s breakdown process that now your PC is running on your OS’s native display drivers and is basically free of the old third-party GPU drivers following the obligatory reboot of the DDU application. To get started, switch off your computer.
3. Disconnect your PC’s wires and establish your workspace.
It’s time to let her go and go on with your life. You can now remove your PC cords from its sockets and ready your machine for terra down now that it’s switched off. Place your PC on a clean surface, such as your workbench or a desk big enough to contain the PC tower.
If you don’t have any other space to work, you can set up your desk on the floor. Simply ensure that your flooring is clean and dust-free, and that you have a mat to use as a desk. It’s usually a good idea to keep your tools and stuff organized so you don’t lose important PC components like the case screws or the GPU case.
4. Before you start working, remember to ground yourself.
This is more of a general advice than a specific procedure, but when you are functioning on your computer, you should strengthen yourself to avoid diminishing any naturally occurring components. When you pull something about the floor or table, this happens.
To remove static, contact any hard object on your computer’s casing. Your power supply is the ideal thing to touch, and you can also make contact with your computer chassis.
Always ground oneself before doing anything within your computer (particularly if you sense yourself whirling a lot), as this will help you feel extremely weary in the long term. Can help you avoid pain!
If you’re worried about forgetting to take this step, use an anti-static hand strap, which would be a wrist strap with a ground cable connected to it. Wrap the alligator clip around your left wrist and attach it into the computer’s power distribution housing. This keeps your feet on the ground and prevents your body from generating static electricity.
5. Take off your computer’s side panel.
Now that you’re set, you can begin dismantling your computer, beginning with the side panel. To open the PC, just remove the screws that keep the side panel in place in the case then gently set it aside.
In some cases, you may only need to loosen the thumb screws with your hands, while in others, a real screwdriver may be required.
6. Unplug PCI Express Cables (PCIe / PCI-E)
The GPU can now be removed from the motherboard by unplugging the PCI Courier (PCIe / PCI-E) cables. These cables are typically found linked to the GPU edge of a computer. Simply pull them gently out of their slot until they are no longer visible.
These wires should always be dragged with plastic connectors in order to avoid damaging the wires themselves. If you need more assistance, you can scoop up your Graphics card by its cooling system or, if it has one, by its backplate.
Liquid cooling pipes and GPU rising tags, for example, are special parts that aren’t usually included in the PC’s overall construction, so you’ll have to look into them further.
7. Remove the GPU from the PC case.
The following scenario is to open this same GPU mounting patch. These tweaks have been placed close to the back of the device in the PCIe enhanced version holes. You’ll need a hammer for this, so keep one on hand.
GPUs are typically mounted on the particular instance with two screws, as the GPU uses two of the enhanced version holes because of its interaction.
8. Remove the GPU from the PCIe extension slot clips.
A next process is to unclip the PCIe enhanced version slot clips which hold the GPU to the motherboard. These clips are typically found near the GPU’s connection pins. The method for erasing such clips varies depending on the motherboard.
Some motherboards include clips that snap into place, requiring you to only open them as backups, whereas others require you to apply constant pressure to the clips when trying to remove the GPU. To avoid ruining the GPU and the motherboard, make absolutely sure the snippets are removed completely.
9. Take out the GPU.
You now can detach the GPU from the PCIe expansion slot once you’ve started opening or holding the clips. Squeeze as firmly as you can on the GPU’s cooling shroud. Avoid touching the GPU’s PCB side to stop adding petroleum and humidity, which can cause corrosion.
Congratulations! You’ve managed to remove this same GPU from your computer, and your Pci express extension port is now empty.
10. Place the GPU inside a static-free bag.
You can skip this step if you’re just cleaning your GPU.
Now the GPU has been removed, you can store it and make a decision what to do about it later. To avoid damage, keep it in an anti wear bag. GPUs are typically sold with just an anti-static bag; therefore, if you have the original packaging for your GPU, users can reuse it with this pro bag to store one’s GPU. can.
While trying to remove the GPU may appear to be a simple task, it necessitates extensive planning in order to be as safe and simple as possible. Consider these steps to be the best way to prevent trying to break something on your GPU or PC and not having to pay the expected bill.