Why Does My Laptop Keep Disconnecting from WiFi?

Why Does My Laptop Keep Disconnecting from WiFi?

The laptop you are using may be disconnected from WiFi as you could have a flawed or obsolete network driver. This could be because your computer is trying to join different WiFi networks in the same range. There is no way to eliminate the possibility of a hardware issue either on your laptop or the router in itself.

About the particular issue you are experiencing, these are the top likely causes of a laptop not connecting to WiFi frequently.

  • The laptop’s WiFi sensor tries for a more reliable network but is confusing due to the multiple networks within range.
  • The WiFi network driver might be in the process of becoming outdated.
  • Your Windows might need a version.
  • Laptop power management systems can turn off the network hardware to cut down on the amount of power consumed.
  • The WiFi card might suffer damage.
  • Wireless Adapter is not correctly set up, and the channels with different frequency ranges are not recognized.
  • It could be that the router’s hardware is broken and is not working properly or not functioning in a satisfactory range.

If you look deeper, there’s a lot of blame for this connectivity issue on the laptop. However, there are a variety of possibilities to pinpoint the source. Additionally, it may be something other than the scope of this list.

Affordable AM3+ Motherboards Review

In the end, it is more straightforward if you are aware of the reason behind it. Then, you can try all the solutions and determine which one is most helpful to you the most. Should it not work, there could be more to explore and tweak before getting back on track.

Looking ahead to the options, there are a few safety measures you must be aware of… but it’s completely your decision if you’d prefer to follow them or not.

Always make backups: Always keep a backup copy of your data in advance to protect your important data in the event of something going wrong. Most importantly, you’ll want to backup your C Users.

Change onto an administrator account: Administrator rights are needed to perform special modifications on your system, so if you’re using local accounts, you should switch to the administrator account.

After the backup process has been completed and the permission has been granted, you must follow the order of steps necessary to fix the issue that your laptop keeps dropping WiFi or WiFi disconnects frequently windows 10.

How to fix the internet keeps disconnecting from WiFi?

1. Troubleshooting the Network

2. Change profile on the network

3. Disable WiFi Sense Feature

4. Disable Random Hardware Access

5. Disable Power Saving for WiFi

6. Change Power Plan setting.

7. Network Socket and IP Reset

8. Custom DNS

9. Check the WLAN services

10. Upgrade WiFi driver

Why Does My Laptop Keep Disconnecting from WiFi

1. Troubleshooting the Network

The process of troubleshooting your connectivity to the Internet is the most effective solution. Not just for this specific issue, but for all laptop issues connectivity, first we have to look into the connectivity.

A lot of the time, it’s not possible to get an instant answer. But what you can do if it is true, and that could save you a lot of time. You can now go on to…

  • Find Troubleshooting in the search box on the Taskbar. (for Windows 10)
  • Open troubleshoot settings
  • Click on the Additional troubleshooting link
  • In the next screen In the next window, click Internet Connections to run the dedicated troubleshooter.

If the troubleshooter provides you with any quick solution, apply it and then see if that solves the problem of WiFi disconnects frequently from Windows 10 or not.

2. Change the Profile of Your Network

Next, check your network profile settings. Making changes to the network profile settings resets the connection, and testing the WiFi network using different visibility settings is logical. Most of the time, the Windows network profiles are set as public, but it is recommended to change it to private to see if this will help.

  • Select the WiFi icon located on the Windows taskbar.
  • There will be properties listed under your network’s connected ones. Click on the one you want to view.
  • Under Network Profile, select Private. This indicates that your computer can be identified by the network that you typically connect to.

After you’ve changed the settings for your profile, you should check whether your connection is stable. If not, you can move on to the next method.

3. Disable WiFi Sense Feature

The feature was developed to automatically select the most suitable network within the laptop’s range. Since it connects to higher-quality networks on its own, it could be disconnected whenever it switches networks if the range in question has multiple networks.

Additionally, the WiFi sense may be confused when the strength of the network fluctuates across multiple local WiFi routers. Therefore, it is sometimes best to leave the WiFi sense feature off.

Review Article: Best Server Motherboard to Buy in 2021

  • Navigate to Settings from the Start Menu and click on Network & Internet.
  • After that, go to WiFi and select Manage Settings for WiFi.
  • Scroll down to WiFi Sense, and disable Connect to networks that are shared by my contacts.
  • Restart your computer if needed, and then check the WiFi connectivity status.
  • If disabling the WiFi sense isn’t enough to resolve the laptop’s disconnect from the WiFi problem, you should focus on the following step.

4. Disable Random Hardware Access

When you’re not connected to an internet connection, the PC scans for WiFi networks in your region to assist you in getting connected. It is possible to enable random hardware addresses to hide your identity from other people. This stops your computer from being tracked when it searches for networks and then connects.

However, the randomness of hardware addresses may confuse the connection, resulting in frequent connectivity issues. This is only when there’s a compatibility problem between the laptop and router WiFi hardware. Therefore, it is recommended not to disable this feature.

To disable it:

  • Set up WiFi in the Open Settings.
  • Check that the Random hardware address for WiFi is disabled.
  • When the settings have been altered, switch your device into the aeroplane setting for a few seconds to refresh and check the WiFi connection again. If it doesn’t work, look at the remaining solutions step-by-step.

5. Disable Power Saving for WiFi

If your laptop is configured to go into power-saving mode when it starts to run on battery power, it is possible that the Adapter for wireless networks could be placed in a sleep state.

This is a common feature of laptops that reduces the battery as wireless network adapters require less power and operate at the right time to receive the network traffic coming via the router.

This is great for efficient power management, but it could result in problems with consistency. It is difficult to sustain connections, which means that the laptop intermittently disconnects from the WiFi. To resolve this issue,

  • Search for device manager in Taskbar.
  • Double-click on your Adapter in the dropdown menu for Network Adapters.
  • Select the Power Management Tab and uncheck the option to allow the computer to shut off this device to conserve power. Click OK.
  • Restart the Internet and test the connection.

6. Change Power Plan setting

If you’re connected to WiFi that uses wireless APs or routers that are not compatible with 802.11 power save, 802.11 power save technology, instability in WiFi connectivity might occur.

If the power-saving function included in Windows is making your laptop intermittently disconnect from WiFi, changing to the highest performance settings will help you get rid of this issue.

This is the case for laptops that have been set to use an energy balance plan (by default):

If the laptop is connected to a source of power, then it is configured by the network adapter to use Maximal Performance mode. This disables 802.11, the power-saving mode.

If your laptop is running on battery power, The wireless network adapter is in the Medium Power Save mode. This is a way to utilize the 802.11 power-saving modes.

Therefore, changing the power schedule to maximum performance for both plugged-in and battery mode is logical. But, be aware that your battery will be drained more quickly when running at maximum speed. Therefore, you should try this setting and make sure that you revert the settings should it not resolve your issue.

  • Access the system by clicking Settings in the”Start Menu.
  • Go to Additional Power Settings under the Power and Sleep section.
  • Click on Change Plan Settings for the plan you’ve selected.
  • Click on the button to change advanced settings for the power.
  • Connect to Wireless Settings for the Adapter>Power saving mode>> On Battery High Performance, and Plugged In Maximum Performance.
  • Click Apply, click OK and then test the Internet.

7. Network Socket and IP Reset

The second option is resetting the IP and Sockets. In simple terms, it restores all network-related settings back to their default settings. This reset will include WiFi, Bluetooth, VPN, Network adapters and Ethernet adapters. Almost everything in Network and Internet settings will be restored to their default settings.

It is possible to use the netsh command in the Windows command prompt to reset the protocol back to the default. This resolves the most serious issues with browsing and problems with network connectivity, for instance, when the Adapter for WiFi detects a network but cannot accept the TCP/IP address. This is one of the major reasons that your laptop has trouble connecting to WiFi.

To reset the Network Socket and IP, follow these steps:

  • Open CMD.
  • Right-click on Command Prompt and ‘Run as Administrator’.
  • For a reset of the Adapter’s network, enter “netsh Winsock reset” and hit Enter.
  • Then type “netsh int IP reset resetlog.txt” and press enter. The IP logs will be reset on your computer.
  • Then type “exit” to quit the command prompt.
  • Restart your system to save any changes.
8. Custom DNS

8. Custom DNS

The custom DNS setting can help resolve laptops that are not connecting to WiFi. Many have reported that this solution worked for them, and you may test it out too. Use these instructions to create an individual DNS configuration.

  • Go to Start >> Settings >> Network & Internet.
  • Scroll down to locate Change Adapter Options.
  • Right-click on the WiFi Adapter you want to connect.
  • Click Properties and double-click Internet Protocol Version 4 (TCP/IPv4).
  • Choose Manual DNS.
  • Type 1 1 1 in a preferred DNS server, and 1 one in an Alternate DNS server. You could also use Google’s Public DNS 8-8-8 8 and 8 4 4 for both the preferred and alternate DNS servers.
  • Test your WiFi connection.

9. Check out WLAN services

You can then attempt to set the WiFi AutoConfig program to start regularly. If the service does not start once your PC is running it, you might experience problems with network connectivity.

  • Use Windows + R and enter services.MSC and press OK.
  • Scroll down to locate WLAN Autoconfig.
  • Right-click and go to Properties.
  • Select the type of Startup as Automatic.
  • Restart the device, and then check the connection.

How Do You Know If Your Motherboard is Bad? Explained

10. Upgrade WiFi driver

  • Find your laptop’s manufacturer’s WiFi driver on Google.
  • Go to the official site of the PC manufacturer. Find the laptop model you have.
  • The driver can be downloaded from the list of drivers by selecting the operating system you are using. You will need to locate an Ethernet driver.
  • Download and install the most up-to-date driver for your laptop.


In this article, we talked in-depth about Why Does My Laptop Keep Disconnecting from WiFi. CCGadget is an online review website for PC hardware that reviews and reviews the best parts for computers that play games. We cover all aspects, from processors, motherboards, graphics cards, RAMs, as also power supplies. If you’re still confused, leave us a comment in the comments section below, we’ll try our best to answer your questions

James Hope
My name's James and throughout the long term. I have actually assembled numerous PCs for me as well as my companions. I love gaming, programming, illustrations planning and essentially whatever has to do with PCs and innovation.